Radio controlled clock

Sometimes I wonder ...

Does anybody really know what time it is?

(Care) Does anybody really care?

Source Credit: "Does Anybody Really Know What Time It Is" by Chicago, from the album entitled "Chicago Transit Authority."

Does anybody really care about time? I do, especially now that I've reached the point in my life where the road ahead of me is shorter than the road behind me. Oh well, time marches on.

Recently I rediscovered one of two radio controlled clocks I own. Oregon Scientific, the vendor from which I bought the clocks, calls them "atomic clocks." They aren't atomic but they can receive a radio signal from the atomic clock operated by the National Institute of Standards (NIST), via radio station WWVB located in Fort Collins, Colorado USA.

The following photo shows the clock was receiving a strong signal from WWVB. This photo was taken indoors, two days after I was able sync my clock by going to the roof of the parking garage for the building where I live.

14 January 2026. Oregon Scientific RM806.

A few days later the clock was receiving a weaker signal from WWVB — too weak to sync the clock using the radio signal from WWVB.

17 January 2026. Oregon Scientific RM806.

The clock still works, but it doesn't update the time to match the exact time from NIST.

"... the RM806 Alarm Clock contains a very accurate quartz movement and will retain precise time even if a signal is missed on a rare occasion." Source Credit: Oregon Scientific RM806 User Manual, p. 7.

Looks like I'll need to revisit the roof occasionally in order to re-sync with WWVB.

Troubleshooting

When I tested the clock for the first time after "rediscovering" it, I used a couple of AAA batteries I've had on hand for quite a while. The clock worked but didn't sync to display the correct time and date, even when it was placed on a window sill for two days. I took the clock to the roof of the parking garage for the building where I live and reset the clock, but it still didn't sync.

Luis Acosta, my good friend and radio guru, suggested I use KiwiSDR to see whether the signal from WWVB can be received at my location. Turns out it can, at least it can be received at a location near mine. Notice the radio transmission is data only, no voice. [Select "USB" (Upper Sideband) and set the frequency for 59 or 60 kHz.]

KiwiSDR station located in Springfield, Virginia USA.

I don't recall seeing the low battery indicator on the clock display but I speculate the old batteries I used initially were too weak to power the radio properly.

"[BATT] Low Battery Indicator - This [BATT] icon indicates that it is time to change batteries." Source Credit: Oregon Scientific RM806 User Manual, p. 6.

So I bought a fresh set of batteries and went to the roof again. This time, the clock synced successfully after a few minutes on the roof.

Related Resources

• Radio Station WWVB | NIST
• Help with WWVB Radio Controlled Clocks | NIST
• The Official U.S. Time | NIST
• Oregon Scientific RM806 User Manual
• KiwiSDR located in Springfield, Virginia USA

Post update: Evidence indicates "Oregon Scientific" is no longer in business although there are vestigial Web pages (such as the ones linked from this blog post) that suggest otherwise. "La Crosse Technology" sells similar "atomic clocks."

Copyright © 2026 by Walter Sanford. All rights reserved.

Receiving radio signals from polar orbiting weather satellites

In my last blog post I wrote ...

It's easier than ever to track National Oceanic and Atmospheric Administration (NOAA) polar orbiting weather satellites, ... Source Credit: Tracking polar orbiting weather satellites.

I used the n2yo.com Web site to get 10-day predictions for NOAA 18. I noticed a good pass on Tuesday, 05 September 2023 so I grabbed my Baofeng UV-5R radio and went outside to a clear place in order to listen for the satellite signal. I was delighted to hear the distinctive sound of the APT radio signal soon after I set up my "ground station."

Recording

I recorded the satellite pass by simply holding the Baofeng UV-5R radio speaker close to the internal microphones on my Apple iPad mini 6 -- a technique demonstrated in a YouTube video by "saveitforparts." I used the Shure "MOTIV Audio" app (for iOS) to record the pass as a 16-bit 44.1 kHz WAV file (mono).

The duration for the pass was 15 minutes. [Start: 12:08. Max: 12:16 (81 degrees, W). End: 12:23.]

First minute of the pass.

One minute centered around the midpoint of the pass.

More noise is to be expected at the beginning and ending of a weather satellite pass, when the spacecraft is near the horizon. The signal should be stronger and clearer when the satellite is nearly overhead, but as you can hear in the preceding WAV file there's still too much noise for a good image.

Decoding

It's easier than ever to decode weather satellite signals to create images. In this case I used "open-weather apt," the free online weather satellite image decoder.

"open-weather apt" seems to work well but only works with 16-bit 11,025 kHz WAV files, so I had to resample the 44.1 kHz WAV files I recorded using my iPad. I used a free audio editor called "Audacity." There are many "how to" videos on YouTube such as this one by Chris Murphy.

Here is my first attempt at direct reception of an APT radio signal.

05 September 2023 | NOAA 18

Not exactly perfect, but hey, experts say it's not bad for my first pass.

Tech tips for decoding using "open-weather apt"

The "open-weather apt" page includes a link to a sample WAV file that you can use to hear and see what a good pass is like.

Download the sample file and listen to it using an application such as QuickTime Player (for Apple and Windows). You can hear both the beeping and "metronome" sounds much more clearly than in my recording.

Then upload the WAV file in order to familiarize yourself with the decoding process. Here's one iteration of the decoded image.

The preceding composite image shows both the visible (left) and infrared (right) channels for the sample satellite pass. Just a little better than mine!

What are the take-aways?

It's easier than ever to receive APT radio signals from weather satellites, with one critical caveat: It's as challenging as ever to receive a strong, clear signal.

• It's clear (pun intended) I need a better antenna than the small "rubber ducky" antenna that comes with the Baofeng UV-5R. I'm considering upgrading to a "V dipole" antenna.
• Signal reception seemed to be better with the "rubber ducky" antenna oriented horizontally (parallel to the concrete pavement), rather than vertically as recommended by YouTuber "saveitforparts." This was especially true when the satellite was nearly overhead -- the dropout might be related to the "null" of vertical antennae.
• I setup my "ground station" on the top of a seven story parking garage located in exurban Washington, D.C. There was too much ambient noise for a clean recording by simply holding the radio speaker close to the microphones in my iPad mini 6, as suggested by YouTuber "saveitforparts."

Perhaps the biggest take-away is a good question. Why try to receive weather satellite images directly when so much high quality imagery is available on the Internet for free? I can't answer that question for you, but I can say for me the challenge is to see whether relatively inexpensive gear can be used to get reasonably good results. Although the quality of my first weather satellite image is disappointing, I was able to successfully track NOAA 18 and hear a radio signal from the satellite -- accomplishments that I can and will build upon.

Related Resource: APT and HRPT

There are two types of NOAA polar orbiting weather satellite imagery that amateur radio enthusiasts attempt to receive.

Direct Readout Services include the Automatic Picture Transmission (APT) for low resolution imagery and High Resolution Picture Transmission (HRPT) for higher-resolution imagery. Source Credit: NOAA Satellite Information Service, U.S. Department of Commerce.

Direct reception of HRPT radio signals is way beyond my level of expertise.

Copyright © 2023 by Walter Sanford. All rights reserved.

Tracking polar orbiting weather satellites

It's easier than ever to track National Oceanic and Atmospheric Administration (NOAA) polar orbiting weather satellites, receive signals from those satellites, and decode the signals to create an image showing the Earth from space at the time of a given satellite pass.

Let's begin with a quick overview of how to track NOAA polar orbiting weather satellites.

n2yo.com | Track 3 satellites

Currently there are three operational environmental satellites, including NOAA 15, NOAA 18, and NOAA 19. Go to the n2yo.com Web site in order to track these satellites (and more).

By default, the track of the International Space Station (ISS) is displayed on a world map. To track one of the NOAA weather satellites, move your mouse cursor over the tab labeled "Most tracked" in the blue menu bar at the top of the screen; select one of the NOAA polar orbiting weather satellites, e.g., NOAA 18. Click on the hyperlinked text labeled "10-day predictions." The next screen shows a table of passes for NOAA 18 for the next 10 days. Click on "All passes" rather than "Visible passes" (the same button toggles from one setting to the other). Times shown in the table are local times.

Excerpt from NOAA 18 10-day predictions.

Look for a pass when the elevation (El) is close to 90 degrees. Then grab your radio and go outside to a clear place. Tune the radio to the satellite frequency, in this case 137.9125 MHz for NOAA 18, and listen for the satellite during the window of time between the "Start" and "End" times shown in the table.

Wait, what radio? Oh yeah, you will need a radio to receive signals from the NOAA polar orbiting weather satellites. That's the bad news. The good news is a relatively inexpensive radio such as the Baofeng UV-R5 should work just fine. The radio sells on Amazon for around $20. Stay tuned for more information about this step in my next blog post.

In the meantime, try tracking and observing the International Space Station. It's easy to spot the station at night during a nearly overhead pass.

Copyright © 2023 by Walter Sanford. All rights reserved.